Your first stop for Arts & Crafts Supplies - Woodcraft - Fabric Dye - Adhesives

  • Free Standard UK Delivery

    on all orders of £35 or more
1 2
Eclectic  |  SKU: GLUEU10562010

E6000 Pump Spray Glue Adhesive

£699 GBP
Tax included, shipping and discounts calculated at checkout.
Size: 118 ml

E6000 Spray Glue Adhesive Clear, Strong, Flexible, Water Resistant and Photo Safe.

E6000 Spray Adhesive is a permanent, multi-purpose, latex-based adhesive without the toxic smells, fumes or unhealthy side effects. It is strong, flexible, water-resistant, and resists bleed-through and yellowing. Ideal for many substrates such as paper, wood, cardboard, photos, medium to heavy weight fabrics, glass, metals and more. The easy-to-use pump sprays a fine, even mist that is solvent and propellant-free.

  • Low odour with easy water clean-up
  • Non-flammable
  • Water resistant Latex formula contains no VOCs, harsh chemicals or propellants
  • Photo safe
  • Dries translucent Indoor/Outdoor

Customer Questions

Q: What substrates does E6000 Spray Adhesive work on?
A: E6000 Spray can be used on a wide variety of substrates. Use on paper, wood, poster boards, cardboard, photos, foil, medium- to heavy-weight fabrics, vinyl, foam, Styrofoam, glass, felt, plastic, rubber, leather & metals.

Q: What temperature range does E6000 Spray Adhesive withstand?
A: Application temperature: Best applied between 10 – 54 °C. Service temperature / heat resistance: 10 – 65 °C.

Q: Is E6000 Spray Adhesive UV resistant?
A: Resists yellowing.

Q: Can E6000 Spray Adhesive be used on Styrofoam™?
A: Yes. E6000 Spray can also be used on other foams.

Q: Is E6000 Spray Adhesive water resistant?
A: Yes. Cured adhesive has good water resistance.

Q: How long does E6000 Spray Adhesive take to dry?
A: Paper, photos, cardboard and foil: (read directions) Allow to dry 1 to 3 minutes. Porous materials: (read directions) Allow to dry 1-5 hours. Styrofoam may require an overnight cure. Non-Porous Materials: (read directions) Allow to dry 1-5 hours.

Q: What is used to clean up uncured E6000® Spray Adhesive?
A: Regular warm water rinsing.

Directions for Use

INSTRUCTIONS

Follow these step-by-step directions when using E6000 Spray Adhesive:

  1. Read all directions before using.
  2. Shake vigorously before use.
  3. Protect surrounding area from overspray.
  4. Point spray tip away from face.
  5. Hold bottle 8-10 inches away from surface.
  6. PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry 1-3 minutes.
  7. POROUS MATERIALS (including foams and Styrofoam: Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.*
  8. NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.*
  9. IMPORTANT – CLEAN AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)