FREE Standard UK Delivery on all orders over £35

  • Free Standard UK Delivery

    on all orders of £35 or more
Jacquard  |  SKU: F-JSI2300

Screen Printing Puff Additive 236ml

£1349 GBP
Tax included, shipping calculated at checkout.

Pickup available at Shop location

Usually ready in 24 hours

Jacquard Puff Additive (236ml) is used to increase the relief of prints on paper, fabric and other surfaces. Simply mix a little of the additive into your Jacquard Screen Ink (up to 20%), print as usual and then apply heat to your print. The microspheres in the Puff Additive expand with heat, giving you a raised print only after heating. Once puffed, the print is washfast and dry-cleanable.

  • Creates a 3D puff effect – Expands when heat set for a raised texture
  • Easy to mix – Simply blend with compatible screen printing inks / paints
  • Perfect for fabric projects – Ideal for t-shirts, hoodies, bags, and home décor
  • Heat activated – Use a heat gun, iron, or dryer to create the puff effect

Directions for Use

USE: Add to Jacquard Screen printing Ink up to 20% by weight. Mix thoroughly. Pot life of mixture is indefinite. Apply heat to print and ink will puff in all directions. For use on paper, fabric, and other surfaces.

FINISH: Puff Additive has a matte finish and will affect the semi-gloss finish of screen printing ink in proportion to the amount added.

OPACITY: Puff Additive becomes opaque upon expansion and will opacify ink in proportion to the amount added.

MESH COUNT: 80-305/inch (32T-122T cm) or according to ink specifications. Ink is recommended with mesh counts 80-160/inch (32T-64T cm).

DRYING / CURING: While print is wet, heat the entire ink deposit to 275˚F/135˚C using a hot air gun or oven to puff. Do not overheat. For best results, allow ink to air cure 72 hours once puffed before washing.

CLEAN UP: Cleans up with water or mild detergent.

CAUTION: Always test this product for washability and durability prior to production.