FREE Standard UK Delivery on all orders over £35

  • Free Standard UK Delivery

    on all orders of £35 or more
Jacquard  |  SKU: F-JSI2300

Screen Printing Puff Additive 236ml

£1349 GBP
Tax included, shipping calculated at checkout.

Jacquard Puff Additive (236ml) is used to increase the relief of prints on paper, fabric and other surfaces. Simply mix a little of the additive into your Jacquard Screen Ink (up to 20%), print as usual and then apply heat to your print. The microspheres in the Puff Additive expand with heat, giving you a raised print only after heating. Once puffed, the print is washfast and dry-cleanable.

  • Creates a 3D puff effect – Expands when heat set for a raised texture
  • Easy to mix – Simply blend with compatible screen printing inks / paints
  • Perfect for fabric projects – Ideal for t-shirts, hoodies, bags, and home décor
  • Heat activated – Use a heat gun, iron, or dryer to create the puff effect

Directions for Use

USE: Add to Jacquard Screen printing Ink up to 20% by weight. Mix thoroughly. Pot life of mixture is indefinite. Apply heat to print and ink will puff in all directions. For use on paper, fabric, and other surfaces.

FINISH: Puff Additive has a matte finish and will affect the semi-gloss finish of screen printing ink in proportion to the amount added.

OPACITY: Puff Additive becomes opaque upon expansion and will opacify ink in proportion to the amount added.

MESH COUNT: 80-305/inch (32T-122T cm) or according to ink specifications. Ink is recommended with mesh counts 80-160/inch (32T-64T cm).

DRYING / CURING: While print is wet, heat the entire ink deposit to 275˚F/135˚C using a hot air gun or oven to puff. Do not overheat. For best results, allow ink to air cure 72 hours once puffed before washing.

CLEAN UP: Cleans up with water or mild detergent.

CAUTION: Always test this product for washability and durability prior to production.